Origin	China
Model Number	GD-EP-M10

Diode End-Pump Laser Marker
GD-EP-M10 Specification
Technical parameter  GD-EP-M10
Wavelength :      1064nm
Average power:    10W
Beam quality:     TEM00(M2: <1.5)
Pulse width:      5-25ns
Q-adjust frequency:    10-100kHz
Standard marking area: 100mm*100mm
Marking area options:  150mm*150mm
Min. line width :      0.01mm
Repetition accuracy:   ±0.001mm
Power consumed:         800W
Power supply:          AC220V/4A
Main equipment:        700*600*1300
Control system :       integrative
Cooling system:        air
                        

Equipment features
   EP laser marker adopts Germany laser part, which is composed of pump and resonator.
Diode-pumped light is integrated by using micro-optic patent, and then is coupled to one hi-power light. After that, light is

radiated to resonator by driving pump. 
   Laser diode pump is compacted in one small box, including fiber coupling laser diode, cooling system and control device.

One heat-exchanger is installed in  the box to cool laser part and current driver. In order to reduce environmental influence

to resonator, onesmart  heat-exchanger is sealed in laser head. Any maintenance  is unnecessary to laser

part.Heatgeneratedbypowersystemand pumping diode is far bigger than resonator. Therefore, diode laser unit and resonator are

installed individually. Pumping fiber can be dismantled by using SMA connectors on both ends.
   Thus, it is easy to replace old laser diode without touching resonator.
 
Advantages
   Good optical model, precise marking;Low power, appropriate to non-metal and some metal, especially high-accuracy marking.

Applications
   This laser marker can be used for marking in electric elements, plastic key, IC, electric apparatus, cell phone and

communication fields.